About your laminated posture grid

Thank you for purchasing one of our laminated grids. George Stylian, DO, has designed the posture grids for Proprioception Australia P/L to help practitioners assess their patients’ posture accurately. The posture grids are Australian made. We have used only high quality materials in their production to ensure their practicality and their longevity.

TO MOUNT ON WALL:

Place the posture grid on the wall so that the bottom of it is about ankle height from the ground. If you are using one of our posture stands as well, then add the height of the posture stand to the ankle height so that when a patient stands up against the grid, the red centre line, lines up with the lateral malleolus.

Secure one of the brass lugs to the wall by using either a wall mate if going into gyprock or screws if going into timber (screws provided). When mounting to a brick wall, you’ll need to use wall plugs.

Once you’ve secured one brass lug into your wall, then use a level to level both top and side of the grid and secure one lug at a time making sure you stretch the grid out as you proceed, from lug to lug. Please note that the lugs on your grid are all-brass and should not rust!

If you have any problems with mounting your grid, or if the grid is not to your satisfaction, please call us on 02 9524 4620.

TO CLEAN:

Just use mild detergent in water and use a soft cloth or sponge to wipe surface of grid clean. Do not use abrasive side of sponges to clean grid surface. Wipe dry with soft cloth.